Breakfast out to Serena Cafe

Serena Cafe was one of those lucky finds. Just don't show up on a Sunday after church!! LOL..
This little place in Serena IL is very easy to just cruise by and never think twice about it. A few years ago my buddy Jim needed some stuff from JC whitney and we were on RT52 that cuts right through Serena. After we were done with the store we were talking about somewhere to eat and we both noticed the Cafe. It's just the perfect place to slow down and get out of the fast pace where everything has to be done quick.
This time I wasn't with that Jim but with my other buddy Jim and his foreign exchange student.
We didn't have much time to ride but we had to get out since the weather finally warmed up.

JNS Engineering skid plate ----- Sweetness!!

After two years of having the KLR someone finally came up with a good answer for the skid plate.
http://jnsengineering.com/ has a rocking plate that bolts up to the stock mounting brackets. The plate is thick and longer going about inch or so past the oil drain bolt. It's made out of aluminum and the welds are very pretty.



My stock plate has taken some pretty good wackes and it's cracked around every bolt hole.
Not as bad as some other I've seen posted on the web, but I'm not going over downed tree or basketball sized rocks. The most it's seen have been softball sized rocks that would pop off of the front tire going down the trails.

Bolt up was super easy and took about 20 minuets. My front stock mount plates were, I think a little tweaked but bolted up perfectly. I did add some loctite since it's become a habit on this bike. Now just need to get out when the weather gets nicer to bounce some rocks at it!!

RD 400 pipes are out

Well the pipes are sent out to the powder coater and with two other parts. The kickstand needed to be replaced since the one I had was experimented with by me. The kickstand would not fold under the expansion pipes. So I bent the stand to work, kind of! It would still touch the pipe when up and clunk over bumps.
HVCcycle.com has a kickstand kit to relocate it a inch farther out and you can take material off to adjust the up position. The kit's a little pricey but no more worries. :)
The pipes will be ceramic coated and will never look like this again..........

KLR Wolo horn install and bracket

I've had this horn on my workbench for over a year now and no good way to bolt it up. The one forum I look at has a few people who did there own brackets to hide away. I've had a few ideas but never really liked mine. There is one guy out of the west coast selling these brackets that don't require cutting stuff off the bike. So nothing getting permanently harmed is my favorite way to go.


Nice simple bracket bolted up to see how the fit up is..
The welds are very nice and clean, no cold welds to fall apart from vibration.

The one other thing the horn NEEDED was a relay. The stock horn pulls 2.5 amps and the Wolo was pulling 15 amps. There is no way the horn switch will last long without a relay.
What I used was a waterproof relay from a recall kit I bought from work. The relay only pulls 250 milliamps so no problem for the switch.
I just safety wired the relay to the grill.




Nice and compact and works very well.

I think a lot of people think noise keeps them safe on the road. The whole "loud pipes save life's" thing is BS. I've had and have louder bikes and still get cars and trucks pulling over in front of me. Also 90% of the time I'll never use the horn to avoid trouble. It's just faster to get out of the problem than go for the horn and hope the crappy driver reacts properly. Most of it's use will probably to get my buddies attention.

added last shot after original posting.